TM 5-3610-257-14
Table 1-3. TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
NO ELECTRICAL POWER TO SECTION - Cont
Step 3.
Check safety switch position.
(a) If safety switch is ON, proceed to step 4.
(b) If safety switch is OFF, turn ON.
Step 4.
Check main circuit breaker position.
(a) If circuit breaker is OFF, turn ON.
(b) If circuit breaker is ON, notify your supervisor.
(c) If circuit breaker trips repeatedly, notify your supervisor.
2.
NO ELECTRICAL POWER TO EQUIPMENT.
Step 1.
Check equipment power switch.
(a) If power switch is on, proceed to step 2.
(b) If power switch is OFF, turn ON.
Step 2.
Check power cord.
(a) If power cord is plugged in, proceed to step 3.
(b) If power cord is unplugged, plug in.
Step 3.
Inspect circuit breaker panel for breakers in OFF position.
(a)
If all circuit breakers are ON, refer to organizational maintenance.
(b)
If any circuit breakers are OFF, turn ON.
1-57
