TM 5-3610-257-14
NOTE
If the equipment must be kept in continuous operation, check and service only those items that
can safely be checked and serviced without disturbing operation. Make the complete checks and
services when the equipment can be shut down.
Table 7-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B- Before
W- Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
IN
FOR READINESS
ITEM TER
ITEM TO BE INSPECTED
REPORTING
NO.
VAL
PROCEDURES
EQUIPMENT IS
NOT READY /
AVAILABLE IF:
LIGHT TABLE CABINET ASSEMBLY
1
B
Inspect External Surface.
WARNING
Death or serious injury may occur from electrical shock unless
power cord is unplugged before servicing.
1.
Unplug power cord.
2.
Inspect power cord for kinks, frays, or burns.
Power cord
is kinked,
frayed,
or burned.
NOTE
If power cord is defective, refer to organizational maintenance.
3.
Plug in power cord.
4.
Turn on power.
Fluorescent
tubes do not
light.
5.
Check fluorescent tubes for flickering.
6.
Check glass surface for cracks or breaks.
Broken or
missing
glass.
7-4
