TM 5-3610-257-14
1-20.3. Replace Personnel/Cargo Door Gasket.
MOS:
63W, Wheel Vehicle Repairer
TOOLS:
Knife, TL-29
SUPPLIES:
Vinyl Gasket
Adhesive (Item 2, Appendix E)
Solvent P-D-680 (Item 45, Appendix E)
Disposable Gloves (Item 21, Appendix E)
Goggles
Cheesecloth (Item 4, Appendix E)
a.
Open door completely and secure in open position.
WARNING
Dry cleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Wear solvent-impermeable gloves and
eye/face protective equipment when using solvent. Do not use near open flame or excessive heat.
Flash point of solvent is 1000 F to 1380 F (380 C to 590 C).
b.
Remove defective gasket by prying gasket from door. Scrape traces of gasket and adhesive from door. Wash
with solvent P-D-680.
c.
Coat gasket area on door with adhesive.
d.
Firmly press new gasket onto door.
e.
Wipe excess adhesive from gasket.
f.
Close door and wipe excess adhesive from door and frame.
g.
Allow adhesive to dry before using door.
1-103
