TM 5-3610-253-14
Table 2-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annually
B . Before
W - Weekly
(Number) - Hundreds of Hours
S - Semiannually
D - During
M - Monthly
BI - Biennially
A . After
Q - Quarterly
For Reediness
ITEM TO BE INSPECTED
Reporting,
IN-
ITEM
Equipment Is
TER-
PROCEDURE
NO.
VAL
Not Reedy/
Available If:
PAPER DRILLING MACHINE - Cont
Inspect Drilling Machine - Cont
1
B
Head is
6. Step on treadle. Check that head moves down
jammed.
smoothly and drill bit just contacts
cutting block.
7. Release treadle.
Check that head moves
up smoothly.
8. Examine cutting block. Block should not be
scored, chipped, or burned.
9. Examine treadle.
Check that treadle does not
contact frame.
10.
Plug in power cord.
Spindle
11. Turn power on.
Check that spindle does not
wobbles.
wobble.
12.
Turn light on and check for proper operation.
Turn off light.
13. Turn off power.
Service Drill Bit.
2
D
1. Turn power on.
WARNING
Blindness or serious injury may occur unless
eye protection is worn when sharpening drill
bit.
2. Put on safety glasses.
2-10
