TM 5-3610-253-14
NOTE
Alternate lighting is required to perform this task.
Turn circuit breaker OFF.
a.
b. Remove bezel nut.
c.
Note notch on label plate and remove label plate.
d. Loosen screws.
NOTE
Note position of cover and reinstall as noted.
Remove cover plate.
e.
f. Tag and disconnect wires from defective switch.
Install new switch and connect wires.
g.
h. Insert switch through cover plate and label plate.
NOTE
Be sure label plate is in same direction as when removed. Secure with
bezel nut.
i.
Aline cover plate with holes and secure with screws.
Turn circuit breaker ON.
j.
1-65
