TM 5-3610-252-14
WARNING
To prevent death or serious injury, do not handle or clean power cable or
connectors when cable is connected to power source.
NOTE
The section must be properly grounded before power is connected. If it is
not possible to drive the three sections of grounding rod fully into ground,
the rods may each be driven into the ground separately and connected in
series.
If it is impossible to drive-a grounding rod; a
ground must be found, such as a buried metal water pipe.
Grounding Techniques for additional instructions.
suitable alternative
See TC 11-6,
(11) Connect grounding cable to grounding lug with wing nut.
1-30
