TM 5-2330-305-14
PROCEDURIES
PARAGRAPH
Replace Leveling Jack . . . . . . . . . . . . . . . . . . . . .4.4.1.22
Ajust Height Control . . . . . . . . . . . . . . . . . . . . .4.4.1.23
Replace Helght Control Valve. . . . . . . . . . . . . . . . . . .4.4.1.24
Replace Air Hoses . . . . . . . . . . . . . . . .4.4.1.25
Replace Hubodomter . . . . . . . . . . . . . . . . . . . . . . .4.4.1.26
4.401.1 REPLACE TIRE.
TOOLS: Socket
Breaker Bar
Extension Bar
Torque Urench
SUPPLIES: Tire
USE ONLY TIRE SIZES AND TYPES LISTED
ON THE SAFETY AND SERIAL PLATE ATTACH-
ED TO THE TRAILER.
USE ONLY WHEEL RIM WIDTHS AND OFFSETS
LISTED THE SAFETY AND SERIAL PLATE
ATTACHED TO THE TRAILER.
1. Lossen, but do not remove, ten wheel nuts.
2. Using leveling jacks, extend jack until tire is just clear of ground.
3. Remove ten wheel nuts.
4. Remove tire and wheel from axle.
5. Remove tire from wheel and repair or replace.
6. Reinstall tire to wheel and inflate to 85 psi maxiumum
TIRES MUST BE MATCHED. VALVES SHOULD
ALL BE POINTED FORWARD. ROTATION
SHOULD BE FRONT TO REAR ONLY.
7. Reinstall tire and wheel to axle.
4-12
