TM 5-2330-305-14
7. Remove brake shoe lining (5.3.2.5).
8. Remove retaining and washer.
9. Remove slack adjuster, washer, O-ring, cam bushing, and O-ring from camshaft.
NOTE
When removing camshaft be sure the seals and washers are not lost.
10. Remove retainer ring.
11. Remove camshaft by pulling through cam bracket and brake spider housing retain associated
seals and washers.
12. Ramove cam bearings
NOTE
Before installing cam bearings sure to thoroughly coat with grease,
MIL-G-10924.
13. Install cam bearings.
14. Install camshaft and associated seals and washers. Secure with retainer ring.
15. Install cam bushing and associated 0-rings and washer.
16. Install slack adjuster and secure with washer and retainer ring.
5-10
