LUBRICATION ORDER
LO 5-3610-253 12
13 SEPTEMBER 1983
TOPOGRAPHIC SUPPORT SYSTEM
FINISHING SECTION
MODEL ADCTSS-16
NSN : 361001 1056443
Reference
TM
5361025314
and
C9100-IL
Intervals and the related manhour times are based on normal
during periods of low activity, but only if adequate preser-
operation. The manhour time specified is the time you need
vation precautions have been taken. The lowest level of
to do all the services prescribed for a particular interval. De-
maintenance authorized to lubricate a point is indicated by
crease the interval and lubricate more frequently if your lu-
one of the following symbols: Operator/Crew (C) and
bricants have been contaminated or you are operating under
Organizational Maintenance (0). Clean all fittings, plugs,
adverse conditions, including longer-than-usual operating
and caps before removal and/or lubrication. Remove all
hours. The intervals between lubrications may be extended
excess oil or grease after lubrication. If possible, exercise
moving parts to distribute lubricant evenly. Lubricate all
external oil can points after washing or fording.
CARD 1 OF 5
