ARMY TM 9-6675-349-12&P
MARINE CORPS TM 11039A-12&P
Legend for Figure 1-6 Description HMMWV Installation Kit Components
Index no.
Nomenclature
Description
1
Floor Plate
Mounts the IPADS Frame to the cargo bed of HMMWV.
2
Floor plate hardware
Three each 1/2-inch diameter by 3-inch long bolts, lock washers
and flat washers.
Three each 1/2-inch flanged nut used on M1123 and M1097
HMMWVs.
3
CDU Support Arm Assembly
Mounts CDU and its CDU mount assembly to the floor plate
4
Alignment Bracket Assembly
Secures the IPADS Frame (BCU and CDU side) to the floor plate.
5
CDU Mount Assembly
Attaches to CDU indexer mast for mounting the CDU to CDU
support arm assembly.
6
T-Handle (four each)
Secures IPADS alignment bracket assembly and mounting clamps
to floor plate.
7
Mounting clamp (two each)
Secures the IPADS assembly (CPNU side) to the floor plate.
8
CDU indexer mast
Attaches to the CDU mount assembly for mounting the CDU to the
CDU support arm assembly.
9
Plumb bob bracket
HMMWV bracket to hang plumb bob over survey marker.
10
Power cable (W-116-1)
Connects IPADS to HMMWV.
11
Plug, NATO
Connects Power cable (W116) to vehicle NATO power plug.
12
Washer, Flat (two each)
Used with T-handle bolts to secure alignment bracket to the floor
plate.
13
Nut, Flange
1-15
