M2A2
AIMING
CIRCLE
5 Close covers on orienting knobs.
6 Cover tube levels by rotating their covers into place.
7 Place the azimuth knob over the notation pad as shown at left.
8 Place cover on aiming circle. Engage and lock the catch assemblies.
9 Unscrew the instrument fixing screw and lift the aiming circle off the tripod.
10 Replace tripod cover assembly.
11 Take down the tripod.
Z Loosen leg clamp thumbscrews.
Z Collapse tripod legs fully.
Z Tighten leg clamp thumbscrews.
Z Close and strap tripod legs together.
65
