TM 5-6675-328-14
g.
Pry out lamp socket holder with flat tip screwdriver.
h.
Using scribe, depress wire clips and disconnect ballast wiring.
i.
Remove nuts and defective ballast.
j.
Install new ballast and connect wires to corresponding lamp socket holders.
k.
Secure with nuts.
l.
Remove tags.
m.
Install new wire ties.
NOTE
Be sure wires are free of kinks and do not interfere with placement of wire guard.
n.
Reinstall wire guard.
o.
Reinstall lamps and safety tabs.
p.
Reinstall diffuser.
q.
Turn on overhead light circuit breaker and main circuit breaker.
1-63
