TM 5-6675-328-14
1-20.7
Repair Van Body Skin (Permanent).
MOS:
63W, Wheeled Vehicle Repairer
TOOLS:
Pop Rivet Gun
Electric Drill and Bits
Paint Brush
SUPPLIES: Pop Rivets
Sprayfoam (Item 23, Appendix E)
Silicone Sealant (Item 19, Appendix E)
Sheet Metal
Paint (Items 13, 13A and 13B, Appendix E)
a.
Bend broken edges of skin inward into puncture hole. Do not attempt to remove fragments of skin by bending or
pulling out.
b.
Remove any loose fragments of foam.
c.
Use cloth dampened with water to clean area around puncture. Wipe dry.
d.
Inject sprayfoam into puncture. Fill to 1/8 in. (3.2 mm) above surface of unbroken skin. Apply sealant to cracks
leading to puncture.
1-100 Change 1
