TM5-6675-326-14
2-19.11 Replace Light Grid Assembly - Continued
g .
Loosen two knobs to allow bottom plate to fall free.
h .
Remove two screws and stage separation plate to locate access
hole. Remove screw and stage separation knob.
i .
Remove four socket-head screws securing ON/OFF switch
assembly.
j .
Remove two socket-head capscrews to release front plate from
end plates.
k .
Remove six socket-head screws and washers securing front
p l a t e .
1 .
Move defective grid until wires are accessible inside light
box. Tag and cut red wires. Disconnect green wire.
2-72
