TM 5-6675-325-14
f. Remove power cord from defective fan assembly.
g.
Install
h.
Install
i.
Connect
j.
Tighten
new fan.
new power cord.
wires with wire nuts and remove tags.
cable clamp screws.
k. Reinstall cover. Secure with screws.
1.
Reinstall fan assembly. Secure with screws.
m.
Plug in power cord.
1-16.10 Replace Exhaust Fan Cover.
MOS :
83FJ6, Reproduction Equipment Repairer
41B, Topographic
TOOLS: Drill and Bits
Pop Rivet Gun
Scraper
SUPPLIES:
Pop Rivets
Exhaust Fan
Gasket
or
Instrument Repair Specialist
Cover-
Solvent P-D-680 (Item 24, Appendix E)
Adhesive (Item 2, Appendix E)
Cheesecloth (Item 8, Appendix E)
Impermeable Gloves
Goggles
1-76
a.
Drill pop rivets from hinged cover to remove vent cover.
