TM 5-6675-325-14
e .
Wipe excess adhesive from gasket.
f. Close door and wipe excess adhesive from door and frame.
g.
Allow adhesive to dry before using door.
1-20.4 Replace Personnel/Cargo Doors.
MOS:
63W, Wheel Vehicle Repairer
PERSONNEL: Two persons are required to perform this procedure.
TOOLS:
Pop Rivet Gun
Electric Drill and Bits
Hoist
3/4 in. Combination Wrench
Paint Brush
SUPPLIES:
Personnel/Cargo Door
Pop Rivets
Vinyl Gasket
Paint (Item 16, Appendix E)
Paint (Item 17, Appendix E)
Adhesive (Item 2, Appendix E)
Cheesecloth (Item 8, Appendix E)
WARNING
1-96
To prevent personal injury or equipment damage, do not attempt to remove
doors unless suitable lifting equipment and hoist are available.
