TM 5-6675-324-14
Replace D rum Heate r Term inals=
3-20.46
MOS: 35E, Special Electronic Devices Repairer
TOOLS:
Cross Tip Screwdriver (6 in.)
Slip Joint Pliers
Flat Tip Screwdriver (3 in.)
SUPPLIES: Heater Fuse
Heater Terminals
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a. Turn power switch to O (OFF).
b. Unplug power cord.
Open front door.
c.
d. Lift lever that holds blade of developing unit in place, out of
groove in drum shaft. Pull lever outward, clear of end of drum shaft,
and lower it to its rest position. Check that stud engages in hole.
3-241
