TM 5-6675-324-14
CAUTION
If vacuum cleaner is used to clean out the developer assembly or
the cleaner assembly, do not let the vacuum cleaner contact the CdS cell
as it will damage the CdS cell.
NOTE
Clean the light tube and the CdS cell with cheesecloth.
h. Reinstall waste developer receptacle in copier.
NOTE
JAM indicator will blink if upper assembly is not locked correctly.
i.
Lower upper assembly and press down with both hands.
Return platen to home position.
j.
3-6.2.3 Clear Paper Jam.
NOTE
If JAM indicator flashes during copy run, remaining number of copies will
be displayed on copy number display. Copy number display returns to 1
when jammed paper is removed. Paper jams usually occur at one of five
locations, except with multiple copy runs, when jam is likely to overlap
two adjacent areas. JAM indicator blinks if upper assembly is not locked
correctly.
3-53
