TM 5-6675-324-14
Table 2-1.
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S
- Semiannually
A - After
Q - Quarterly
BI - Biennially
For Readiness
ITEM TO BE INSPECTED
Reporting,
lN-
ITEM
Equipment Is
TER-
NO.
PROCEDURE
Not Ready/
VAL
Available If:
PORTABLE TRACING/SCRIBING BOARD - Cont
Inspect/Clean - Cont
B
1
4. Check glass surface for dust and dirt. Wipe
Glass surface
glass surface with moistened cheesecloth.
is cracked or
Wipe surface with clean dry cheesecloth to
scratched.
remove smears or streaks. Check glass sur-
face for cracks or scratches. Replace as
needed (paragraph 2-10.4).
2-6. OPERATION UNDER USUAL CONDITIONS.
2-6.1
Assembly and Preparation for Use.
a. Remove portable tracing/scribing board from wall mount by loosening straps.
Place board on work surface.
b. Plug in power cord and turn power switch ON.
2-5
