TM 5-6675-324-14
d.
Remove defective support bracket.
Secure to van with bolts, lockwashers, and
e.
Install new support bracket.
washers.
f. Reinstall drain tube on support bracket, and secure with new ties.
Reinstall air conditioner/heater (paragraph 1-20.8).
g.
Replace Ventilation Duct.
1-20.10
MOS:
52C, Utilities Equipment Repairer
TOOLS: Hacksaw
Electric Drill and Bits
Ball Peen Hammer
Pop Rivet Gun
Paint Brush
Cross Tip Screwdriver
Silicone Sealant (Item 23, Appendix E)
SUPPLIES:
Wood Block
Pop Rivets
Paint (Item 18, Appendix E)
Cheesecloth (Item 7, Appendix E)
Salvaged Ventilation Duct
a.
Turn off air conditioner/heater so air will not blow through duct.
Remove joiner plates.
b. Drill rivets from damaged section of duct.
Remove mounting screws to remove damaged sections of duct.
c.
1-107
