TM 5-6675-324-14
c.
Loosen screws on cable clamp.
d.
Remove screws and cover.
e.
Tag wires and cut wire nuts from wires.
f.
Remove power cord from defective fan assembly.
Install new fan.
g.
h.
Install new power cord.
i.
Connect wires with wire nuts and remove tags.
Tighten cable clamp screws.
j.
Secure with screws.
k.
Reinstall cover.
Reinstall fan assembly. Secure with screws.
l.
m.
Plug in power cord.
1-16.10 Replace Exhaust Fan Cover.
MOS :
83FJ6, Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS :
Drill and Bits
Pop Rivet Gun
Scraper
Pop Rivets
SUPPLIES:
Exhaust Fan Cover
Gasket
Solvent P-D-680 (Item 25, Appendix E)
Adhesive (Item 2, Appendix E)
Cheesecloth (Item 7, Appendix E)
Impermeable Gloves
Goggles
1-76
