TM 5-6675-323-14
j.
Turn
grid
intensity
control
fully
left.
k. Carefully turn screw in low level adjustment resistor until light
output is 500 foot lamberts.
l.
R e c h e c k high intensity by turning INCREASE potentiometer knob fully
right and readjust as required.
m.
Repeat procedure for other light grid. Adjust so that light grids are
as equal as possible.
n.
T u r n main power switch and ON/OFF switch to OFF.
o.
Reinstall cover and tighten screws.
6-58
