TM 5-6675-323-14
f.
R e m o v e screw and plastic shield from PCA A5.
U n p l u g fan cable from PCA A5.
g.
Disconnect ground wire from fan.
h.
i.
R e m o v e screw and latching bar.
R e m o v e four screws and fan mounting bracket.
j.
Discard
defective
fan.
k.
l.
Install new fan on bracket and secure with four screws.
Reinstall latching bar and secure with screw.
m.
n.
R e c o n n e c t ground wire.
o.
P l u g fan cable into PCA A5.
p.
Reinstall plastic shield and tighten screw.
Reinstall grounding spring and secure with two screws.
q.
r.
Reinstall fan assembly and secure with four screws.
s.
Reinstall filter and filter mounting bracket and secure with two screws.
t.
Lower upper deck assembly and reinstall rear hood.
3 - 2 9 . 1 3 P e n Solenoid Replacement.
MOS:
35E, Special Electronic Devices Repairer
TOOLS:
C r o s s Tip Screwdriver (No. 0)
SUPPLIES:
Pen Solenoid
WARNING
Death or serious injury may occur from electrical shock unless power cord is
unplugged before servicing.
CAUTION
Do not touch dashpot piston with bare hands. Skin oils will damage surface
of piston.
a.
R e m o v e pen carriage cover.
3-284
