TM 5-6675-323-14
f. Holding it taut, apply tape perpendicular to panel skin. Do not apply
w i t h r o l l i n g m o t i o n e i t h e r e n d - t o - e n d o r c e n t e r - t o - e n d s . D o not rub
each strip in place individually. Apply all strips lightly with proper
overlap and rub into place.
I f necessary, damaged tape can be replaced; however, it should be
g.
removed with careful peeling motion to avoid damage to sealant. If
s e a l a n t also peels back, new sealant should be applied. Complete
removal of old sealant is not necessary.
Permanent repair by direct
s u p p o r t , or higher category of maintenance, should be made as soon as
possible.
1-16.14 Replace Tiedown Socket.
MOS:
8 3 F J 6 , Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS:
C r o s s Tip Screwdriver
Flat Tip Screwdriver
SUPPLIES:
T i e d o w n Socket
R e m o v e screws from tiedown socket.
a.
b. Pry defective socket from floor.
Install new tiedown socket.
R o t a t e new tiedown socket enough to avoid
c.
installing screws in old screw holes.
Reinstall
screws.
d.
1-80
