TM 5-6675-323-14
Reinstall mounting screws.
j.
k. Reinstall cover plate and secure with screws.
Turn on switch circuit breaker.
l.
1-16.5 Replace Blackout/Dome Light Microswitch.
MOS:
8 3 F J 6 , Reproduction Equipment Repairer
41B, Topographic Instrument Repair Specialist
TOOLS:
Flat Tip Screwdriver
6 in. Adjustable Wrench
Microswitch
SUPPLIES:
WARNING
Death or serious injury may occur from electrical shock unless power is
off before servicing.
Turn off blackout/dome light circuit breaker.
a.
b. Remove conduit cover.
Remove nut and pull out switch to expose wiring.
c.
d.
Disconnect
wires
from
defective
switch.
Connect wires to new switch.
e.
f.
Install switch and secure with nut.
Adjust striker plate until plate contacts roller.
g.
h. Reinstall conduit cover.
Turn on circuit breaker.
i.
1-68
