TM 5-6675-323-14
(2) Connect air hose to valve.
(3) Inflate each mount until top of diaphragm is level as shown.
(4)
Reinstall
valve
caps.
WARNING
D e a t h or serious injury may occur if power c a b l e i s d i s c o n n e c t e d w h i l e
power is on.
f.
Turn equipment switches off.
Turn main circuit breaker off.
g.
h.
Turn safety switch off.
i . Have power cable disconnected at power supply end. Then disconnect power
cable from receptacle.
Put cable in storage box on trailer chassis.
Turn emergency light switch off.
j.
k.
Disconnect telephone cables from power entry panel.
CAUTION
T o prevent loss of rod or thread damage, do not allow ground rod to
r o t a t e and unscrew when removing the slide hammer rod.
l.
R e m o v e ground rod with slide hammer, and put ground rods, couplings, and
Clean threads on each ground rod before storing.
slide hammer inside section.
NOTE
Be certain exhaust fan and air vent covers are securely closed.
1-35
