TM 5-6675-322-14
8-16.5 Remove/Install Supply Cabinet.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
1/4 in. Socket Set
1/4 in. Socket Extension, 6 in. Long
11/32 in. Combination Wrench
Cross Tip Screwdriver
SUPPLIES:
Supply Cabinet
a.
Remove bolts and washers holding cabinet to wall.
b.
Remove caps and lag bolts holding mounting bracket to floor and remove
c a b i n e t.
c .
Remove screws, lockwashers, and nuts and remove mounting bracket and
spacer from cabinet.
Retain mounting bracket and spacers for use on new
c a b i n e t.
d .
Position spacers and mounting bracket on new cabinet, and install but do
not tighten screws,
lockwashers, and nuts.
e.
Place new cabinet in position, and install but do not tighten lag bolts.
f . S e c u r e c a b i n e t t o w a l l w i t h f l a t w a s h e r s a n d b o l t s .
g .
Tighten the bracket retaining bolts and nuts.
h.
Tighten the bolts holding the mounting bracket to the floor, and install
the caps.
Change 1
8-11
