TM 5-6675-321-14
7-16.5 Remove/Install Supply Cabinet .
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
1/4 in. Socket Set
1/4 in. Socket Extension, 6 in. long
11/32 in. Combination Wrench
Cross Tip Screwdriver
SUPPLIES:
Supply Cabinet
a.
Remove bolts and washers holding cabinet to wall.
b. Remove caps and lag bolts holding mounting bracket to floor and remove
c a b i n e t.
c.
Remove screws, lockwashers, nuts, mounting bracket, and spacer from
c a b i n e t .
Retain mounting bracket and spacers for use on new cabinet.
d.
Position spacers and mounting bracket on new cabinet. Install but do
not tighten screws,
lockwashers, and nuts.
e.
Place new cabinet in position and install, but do not tighten lag bolts.
f. Secure cabinet to wall with lockwashers and bolts.
g.
Tighten the bracket retaining bolts and nuts.
h. Tighten the bolts holding the mounting bracket to the floor, and install
the caps.
7-10 Change 1
