TM 5-6675-321-14
WARNING
Serious injury to personnel or damage to equipment may occur unless two or
more personnel are used to remove and replace air conditioner/heater because
of weight and balance of air conditioner/heater.
a.
b.
c.
d .
e .
f .
g.
Remove air conditioner/heater (paragraph 1-20.8).
Cut drain tube ties, and remove drain tube from support bracket.
Remove bolts, lockwashers, and washers securing support bracket.
Remove defective support bracket.
Install new support bracket.
Secure to section with bolts, lockwashers,
and washers.
Reinstall drain tube on support bracket, and secure with new ties.
R e i n s t a l l a i r c o n d i t i o n e r / h e a t e r ( p a r a g r a p h 1 - 2 0 . 8 ) .
1-20.10 Replace Ventilation Duct.
MOS: 52C, Utilities Equipment Repairer
TOOLS: Hacksaw
E l e c t r i c D r i l l a n d B i t s
Ball Peen Hammer
Pop Rivet Gun
Paint Brush
Cross Tip Screwdriver
SUPPLIES: Sealant (Item 17, Appendix E)
Wood Block
Pop Rivets
Paint (Item 13, Appendix E)
Cheesecloth (Item 5, Appendix E)
Salvaged Ventilation Duct
a.
Turn off air conditioner/heater so air will not blow through duct.
1-98
