TM 5-6675-320-14
d. Loosen, but do not remove socket head setscrew.
e .
Remove center bolt and washer.
f. Remove bolts, washers, lockwashers, and nuts; remove defective
pillow block assembly.
g .
Install new pillow block assembly and secure with nuts, lockwashers,
washers, and bolts.
h.
Grease bearing (Paragraph 5-11.1).
i .
Reinstall washer and center bolt.
j .
Tighten socket head setscrew.
k. Remove table top assembly supports.
5-33