TM 5-6675-319-14
WARNING
d. Remove left and right hood panels.
e.
Loosen turnbuckle as much as possible.
When removing spring mounting bracket, release spring tension by loosening
turnbuckle. Spring will still be under tension. Serious injury may occur
unless bracket is held tightly when removing nut.
f. Remove spring mounting bracket.
g.
Remove defective switch, tag and desolder wiring.
h. Solder wiring to new switch and install on bracket .
i .
Reinstall spring and spring mounting bracket, and tighten spring turn-
b u c k l e .
j .
Reinstall side cover.
k. Close hood.
l .
Turn on circuit breaker.
m.
Turn on MASTER POWER switch.
9-169
