TM 5-6675-318-14
(8) Tag and disconnect wires from both battery packs.
(9) Disconnect vent tube at connector and remove defective battery pack
and mounting bracket.
(10) Remove battery pack from mounting bracket.
(11) Secure new battery pack to mounting bracket.
(12) Connect vent tube to connector.
NOTE
P o s i t i v e ( + ) w i r e i s r e d w i r e.
(13) Connect wires to battery terminals.
(14) Install battery pack assembly and ground wire on front panel.
b.
Battery pack 2.
(1) Perform steps (1) through (6) paragraph 4-20. 5a.
(1 . 1) Remove circuit boards (paragraph 4 - 20 . 2).
(2) Disconnect vent tube at three-way connector.
(4) Starting with the two screws inside card cage, remove securing
screws and defective battery pack.
Change 2 4 - 2 17
R e m o v e g r o u n d w i r e f r o m c h a s s i s .
(3)
