TM 5-6675-317-14
b.
Remove caps and lag bolts holding mounting bracket to floor. Remove
defective cabinet from section.
c.
Remove bolts, nuts, and lockwashers.
spacer from cabinet.
Retain mounting
Remove mounting bracket and
bracket and spacers for use on new
cabinet.
d.
Position spacers and mounting bracket on new cabinet. Install but do
not tighten bolts, nuts, and lockwashers.
e.
Place new cabinet in position and install but do not tighten lag bolts.
f.
Secure cabinet to wall with three bolts, lockwashers, and flat washers.
g.
Tighten the bracket retaining bolts and nuts.
h.
Tighten the bolts holding the mounting bracket to the floor, and install
the caps.
7-17. PREPARATION FOR STORAGE OR SHIPMENT. Contact your battalion for packing and
shipping instructions.
Section V
There are no direct/general
equipment.
DIRECT/GENERAL SUPPORT MAINTENANCE
support maintenance procedures assigned for this
7-15
