TM 5-6675-317-14
a.
Turn off power switch unplug power cord.
b.
Unplug above-stage and table illuminator cords.
c. Remove screws from cover on underside of crosspi
cover to allow access to potentiometer.
ece assembly. Move
d.
Loosen setscrews on illuminator control knob. Remove knob, nut, and
e.
f.
g.
h.
i.
j.
k.
1.
m.
n.
washer.
Remove potentiometer through underside of crosspiece assembly.
Loosen screw on potentiometer and remove mount.
Tag and desolder wires.
Solder wires to new potentiometer and remove tags.
Reinstall mount and tighten screw.
Position potentiomenter in crosspiece assembly.
Reinstall washer and hex nut.
Reinstall knob and tighten setscrews.
Reinstall cover on underside of crosspiece assembly and secure with
screws.
Plug in above-stage and table illuminator cords.
Plug in power cord and turn on power.
4-45
