3-48
TM 5-6675-317-14
c. Loosen
d. Remove
e. Remove
setscrew and remove knob from defective potentiometer.
screws and illumination controller cover.
bezel nut and washer from defective potentiometer.
f. Push defective potentiometer through housing.
g.
Tag and desolder defective potentiometer wiring.
h.
Solder wiring to new potentiometer and install potentiometer into
controller housing.
i.
Reinstall washer and bezel nut.
j. Reinstall knob.
k.
Reinstall cover.
l.
Plug in power cord.
