TM 5-6675-316-14
11-16.6 Remove/Install Supply Cabinet.
MOS: 41 B, Topographic Instrument Repair Specialist
or
83FJ6, Reproduction Equipment Repairer
TOOLS: 1/4 in. Socket Set
1/4 in. Socket Extension, 6 in. long
11/32 in. Combination Wrench
Cross Tip Screwdriver
SUPPLIES: Supply Cabinet
a. Remove bolts and flat washers holding cabinet to wall.
b. Remove caps and lag bolts holding mounting bracket to floor, and remove defective cabinet.
c. Remove nuts, Iockwashers, and screws and remove mounting bracket and spacer from cabinet. Retain
mounting bracket and spacers for use on new cabinet.
d. Position spacers and mounting bracket on new cabinet, and install but do not tighten screws, Iockwashers,
and nuts.
e. Place new cabinet in position, and install but do not tighten lag bolts.
f. Secure cabinet to wall with flat washers and bolts.
g. Tighten the bracket retaining bolts and nuts.
h. Tighten the bolts holding the mounting bracket to the floor, and install the caps.
Change 1
11-11
