B-52
TM 5-0675-316-14
P.
Reinstall cover plate
q.
Slide main drive gear
on top of motor.
on shaft and insert roll pin.
r.
Loosen screws and reinstall drive belt.
Tighten screws.
CAUTION
Do not tighten belt so tight that sudden stop by one of gears will stretch
or snap belt.
8-20.2
s.
Slide motor away from secondary gear with one hand until belt is taut.
Tighten one mounting screw.
t.
Check belt for tightness by trying to turn main gear while turning
secondary gear.
u.
If belt slips over teeth, it is too loose. Repeat step s.
v.
Tighten remaining motor mounting screws.
w.
Reinstall right side panel.
x.
Reinstall inner panel.
Y.
Reinstall top deck cover and top roller cover.
Replace Capacitor.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Flat Tip Screwdriver
SUPPLIES: 47 MFD Capacitor (120 V)
Insulation Sleeving -
WARNING
Serious injury may occur if internal components are touched when heat
is on.
Remove heat source and allow to cool, or wear protective
clothing before servicing.
Death or serious injury may occur from electrical shock unless power
cord is unplugged before servicing.
a.
Unplug
b. Remove
power cord.
top deck cover and top roller cover.
