TM 5-6675-316-14
c.
Deflate air shocks to allow access to retaining nut. Remove
retaining nuts from air shocks.
d.
Block table frame.
e.
Remove side braces.
(1) Remove capscrews and washers from sides and base of table.
(2) Remove shims.
(3) Slide braces out from underneath table.
f. Remove bolts securing rear legs of table.
9.
Remove bolts securing front legs of table.
h. Slide defective table to center aisle and remove from section.
i.
Install new table, and secure front legs with bolts.
j.
Secure rear legs of table with bolts.
k. Reinstall shims and side braces, and secure with capscrews and
washers.
CAUTION
Do not inflate air shocks over 70 psi or damage to equipment could result.
l.
Reinstall four retaining nuts in air shocks. Inflate air shocks.
m.
Remove tape, and uncoil power cord.
n.
Plug in power cord and turn power on.
4-17. PREPARATION FOR STORAGE OR SHIPMENT. Contact your battalion for packing
and shipping instructions.
4-51
