TM 5-6675-316-14
f. Slide power supply base plate from the controller.
g.
Remove power supply screen.
h. Tag and disconnect wiring from switching power supply.
i.
Turn base plate on end and remove two screws and defective power supply
assembly.
j .
Install new power supply assembly and secure with two screws.
k. Reconnect wiring to new power supply.
l.
Reinstall power supply screen.
m.
Slide power supply base plate into controller and secure with two
screws at rear of base plate.
n.
Reinstall rear connector panel assembly and secure with two screws.
o .
Tighten nuts at front of power supply base plate.
P.
Close front panel of
q.
Reinstall rear cover
r.
Reinstall controller
DSP controller.
of controller.
on shelf.
3-181
