TM 5-6675-316-14
f. Tag and desolder wires from potentiometer.
Remove two screws.
g.
h. Remove locknut and raise mounting bracket.
Loosen setscrews and remove thumb dial.
i.
Remove defective potentiometer.
j.
k. Install new potentiometer.
l.
Reinstall thumb dial and tighten setscrews. Reinstall retaining
locknut.
Reinstall mounting bracket with two screws.
m.
n.
Reconnect wires.
o.
Reinstall cover.
Turn on circuit breaker.
p.
Turn on power switch.
q.
r.
Close top left panel.
Perform diagnostic test.
s.
2-269
