TM 5-6675-316-14
Table 2-8. TEST DESCRIPTION - Cont
Test
Description
COpy Q uality Diagnostics
Test 26:
Copy Quality
This test automatically performs tests
26 through 29 inclusive.
Test 27:
Horizontal Spacing, Tip
Evaluates escapement carriage and
and Baseline
scanning mirror. Continuous horizontal
line of connected dashes indicates
stepping accuracy of escapement
carriage. Setting of scanning mirror is
analyzed by group of three interlocking
images.
Test 28:
Interfont Focus,
This test evaluates interfont focus,
Exposure, and Baseline
exposure and baseline. Copy produced is
character "M" from fonts 1 and 4 mixed
on same line. Each line is different
size starting at 5.5 points through 74
points.
Intersize Horizontal and
Test 29:
Evaluates margin and baseline alinement
Vertical Ruling.
between sizes. Bottom edge of 5.5 point
character and bottom edge largest
character (dash) should aline.
Likewise, left edge of 5.5 point
character and left edge of largest
character (vertical rule) should aline.
ae.
Run automatic sequence diagnostic.
(1) Press cursor left.
(2) Momentarily press reset.
(3) Allow automatic test sequence to run and observe test results.
(a) Test pass screen indication
.
(b) Test failure will be indicated by a test code #XXX. Check
this number with failure code in table in specific test.
2-210
