TM 5-6675-316-14
1-19. DIRECT/GENERAL SUPPORT TROUBLESHOOTING PROCEDURES.
a. Direct/general support troubleshooting procedures cover the most common
malfunctions that may be repaired at the direct/general support level. Repair or
adjustment requiring specialized equipment is not authorized unless such equipment
is available. Troubleshooting procedures used by lower level maintenance should be
conducted in addition to the direct/general support troubleshooting procedures.
b. This manual cannot list all the possible malfunctions or every possible
test/inspection and corrective action. If a malfunction is not listed or corrected
by a listed corrective action, notify your supervisor.
For unidentified malfunctions, use the facing schematic or the foldout
located at the end of this manual for further fault analysis.
Table 1-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
PERSONNEL/CARGO DOORS DO NOT CLOSE COMPLETELY.
Step 1.
Check that latch rollers rotate freely.
Check to see if latch rods are bent.
Step 2.
Check to see if door gasket is torn or broken.
Step 3.
2. PERSONNEL/CARGO DOORS DO NOT LATCH PROPERLY.
Check door latch for missing or damaged components.
3. AIR OR WATER ENTERS SECTION AROUND DOOR.
Check to see if door gasket is worn or broken.
1-89