TM 5-6675-315-14
n.
Cycle ram to extended position.
o.
Turn off circuit breaker and main power switch; then mark position of switch rail panel on ram cylinder.
p.
Remove U-clamps and switch rail from ram cylinder.
q.
Slide switch rail towards rear of machine until switches can be reached; then remove switch.
r.
Tag and disconnect wires.
s.
Replace switch. Be sure wires are firmly connected.
t.
Reposition switch rail on ram cylinder and secure with U clamps.
u.
Reinstall control switch rail cover plate.
v.
Reinstall bottom front cover and bottom side panel.
w.
Turn on circuit breaker.
x.
Turn on main power switch.
y.
Push rear red safety switch and return switch.
2-110
