TM 5-6675-315-14
Table 2-3. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
NOTE
If the equipment must be kept in continuous operation, check and service only those items that
can safely be checked and serviced without disturbing operation. Make the complete checks and
services when the equipment can be shut down.
B - Before
W - Weekly
AN - Annually
(Number) - Hundreds of Hours
D - During
M - Monthly
S - Semiannually
A - After
Q - Quarterly
BI - Biennially
ITEM TO BE INSPECTED
For Readiness
IN
Reporting
ITEM
TER-
PROCEDURE
Equipment Is
NO.
VAL
Not Ready/
Available If:
SHREDDER-BAGGER
1
A
Service and Inspect Shredder-Bagger.
1.
Press stop switch. When press ram has returned
to start position, turn key switch to OFF.
2.
Remove screws at bottom of right side cutter
mechanism cover.
3.
Grasp cutter mechanism cover at bottom and top.
Remove cover by lifting straight up several
inches and then pulling away.
2-20
