TM 5-6675-315-14
1-20.3
Replace Personnel/Cargo Door Gasket.
MOS:
63W, Wheel Vehicle Repairer
TOOLS:
Knife
SUPPLIES: Vinyl Gasket
Adhesive (Item 1, Appendix E)
Solvent P-D-680 (Item 17, Appendix E)
Impermeable Gloves
Goggles
a.
Open door completely and secure in open position.
WARNING
Dry cleaning solvent, P-D-680, used to clean parts is potentially dangerous to personnel and property. Avoid
repeated and prolonged skin contact. Wear solvent impermeable gloves and eye/face protective equipment
when using solvent. Do not use near open flame or excessive heat. Flash point of solvent is 100°F to 1380F
(380C to 590C).
b.
Remove defective gasket by prying gasket from door. Scrape traces of gasket and adhesive from door.
Wash with solvent P-D-680.
c.
Coat gasket area on door with adhesive.
d.
Firmly press new gasket onto door.
e.
Wipe excess adhesive from gasket.
f.
Close door and wipe excess adhesive from door and frame.
g.
Allow adhesive to dry before using door.
1-94
