TM 5-6675-314-14
1-16.10 Replace Exhaust Fan Cover.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS: Drill and Bits
Pop Rivet Gun
Scraper
SUPPLIES: Pop Rivets
Exhaust Fan Cover
Gasket
Solvent P-D-680 (Item 40, Appendix E)
Adhesive (Item 1, Appendix E)
Cheesecloth (Item 12, Appendix E)
Impermeable Gloves
Goggles
a.
b.
c.
d.
Drill pop rivets from hinged cover to remove vent cover.
Remove defective vent cover and transfer mounting hardware to new cover.
WARNING
Dry cleaning solvent, P-D-680, used to clean parts is potentially
dangerous to personnel and property. Avoid repeated and
prolonged skin contact. Wear solvent-impermeable gloves and
eye/face protective equipment when using solvent. Do not use near
open flame or excessive heat. Flash point of solvent is 100°F to
138°F (38°C to 59°C).
Scrape gasket off section and clean area with solvent P-D-680.
secure new gasket to section with adhesive.
e. Aline exhaust fan vent cover and pop rivet to hinge.
f. Test cover for tightness of closure.
1 - 7 3