TM 5-6675-314-14
1-20.7 Repair Van Body Skin (Permanent).
MOS: 63W, Wheel Vehicle Repairer
TOOLS: Pop Rivet Gun
Electric Drill and Bits
Paint Brush
SUPPLIES: Pop Rivets
Sprayfoam (Item 42, Appendix E)
Silicone Sealant (Item 36, Appendix E)
Sheet Metal
Paint (Items 21, 22 and 23, Appendix E)
Cheesecloth (Item 12, Appendix E)
a.
b.
c.
d.
Bend broken edges of skin inward into puncture hole. Do not attempt to remove fragments of skin by
bending or pulling out.
Remove all loose fragments of foam.
Use cloth dampened with water to clean area around puncture. Wipe dry.
Inject sprayfoam into puncture, Fill to 1/8 in. (3.2. mm) above surface of unbroken skin. Apply sealant
to cracks leading to puncture.
1-96
Change 1
