TM 5-6675-313-14
1-16.10
i.
Connect
j.
Tighten
wires with wire nuts and remove tags.
cable clamp screws.
k.
Reinstall cover.
Secure with screws.
l.
Reinstall fan assembly. Secure with screws.
m.
Plug in power cord.
Replace Exhaust Fan Cover.
MOS: 83FJ6, Reproduction Equipment Repairer
TOOLS:
Drill and Bits
Pop Rivet Gun
Scraper
SUPPLIES:
Pop Rivets
Ventilation Fan Cover
Gasket
Solvent P-D-680 (Item 18, Appendix E)
Adhesive (Item 1, Appendix E)
Cheesecloth (Item 5, Appendix E)
Impermeable Gloves
Goggles
a.
Drill pop rivets from hinged cover to remove vent cover.
b.
Remove defective vent cover and transfer mounted hardware to new cover.
1-74
