TM 5-6675-313-14
f.
Turn main circuit breaker OFF.
g.
Turn safety switch OFF.
h.
Have power cable disconnected at power supply end. Disconnect power cable
from receptacle.
Put cable in storage box on trailer chassis.
i.
Turn emergency light switch OFF.
j.
Disconnect telephone cables from power entry panel.
CAUTION
To prevent loss of
rotate and unscrew
rod or thread damage, do not allow ground rod to
when removing the slide hammer rod.
k. Remove ground rod with slide hammer and put ground rods, couplings, and
slide hammer inside section.
Clean threads on each ground rod before storing.
NOTE
Be certain exhaust fan and air vent doors are securely closed.
l.
Reinspect section interior for loose equipment and close all vents.
m.
Close section.
Secure and lock all personnel doors and cargo door.
NOTE
Be sure air conditioner/heater covers are down and secured.
n.
Remove
o.
Remove
p.
Secure
handrails from boarding ladders.
boarding ladders and insert handrails into back of ladders.
ladders to back of section.
q.
Fully extend landing gear.
r.
Retract leveling jacks.
s.
Visually inspect section exterior to be sure all equipment and covers are
secured.
1-35
