TM 5-6675-313-14
Section II OPERATING INSTRUCTIONS
8-4. DESCRIPTION AND USE OF OPERATOR’S CONTROLS AND INDICATORS. This equip-
ment has no operator’s controls or indicators.
8-5. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES. There are no
operator PMCS procedures assigned for this equipment.
8-6. OPERATION UNDER USUAL CONDITIONS.
8-6.1 Preparation for Movement.
Ensure that portable equipment is properly secured
with provided tiedowns.
8-7. OPERATION UNDER UNUSUAL CONDITIONS. There are no specific requirements
for operation under unusual conditions.
Section III OPERATOR MAINTENANCE
8-8. LUBRICATION INSTRUCTIONS.
This equipment does not require lubrication.
8-9. TROUBLESHOOTING PROCEDURES. There are no operator troubleshooting proce-
dures assigned for this equipment.
8-10. MAINTENANCE PROCEDURES.
a. This section contains instructions covering operator maintenance functions for
the furniture and cabinets.
Personnel required are listed only if the task requires
more than one.
b.
After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning.
8-10.1 Inspect Cabinets and Furniture.
Inspect furniture and cabinets for
structural
damage, rust, and proper operation of all latches, hinges, drawer slides,
and adjustment mechanisms.
8-4
